How to adjust the high beam
The correct use of high beams is an important guarantee for driving safety at night, but many drivers are not familiar with the adjustment methods of high beams. This article will combine popular topics and hot contents across the network for the past 10 days to introduce you in detail the adjustment steps, precautions and relevant regulations of high beams to help you drive safely.
1. High beam adjustment steps
Adjusting the high beam requires following the steps below to ensure that the light angle and brightness meet safety standards:
| step | Operation Instructions |
|---|---|
| 1. Prepare tools | Prepare screwdrivers, tape measure, leveling and other tools to ensure that the vehicle is parked on a flat ground. |
| 2. Measure the height | Measure the height of the center point of the high beam from the ground and mark it on the wall or curtain. |
| 3. Adjust the light angle | Use a screwdriver to adjust the up and down and left and right angles of the high beam to ensure the center of the beam is aligned with the mark. |
| 4. Test the effect | Test the high beam illumination range on safe roads at night to avoid dazzling other vehicles. |
2. Precautions for using high beam lights
The following things should be paid special attention to when using high beams to avoid posing safety hazards to others:
| Things to note | illustrate |
|---|---|
| 1. Switch to low beam when meeting | When meeting with the opposite vehicle, switch to low beams in advance to avoid dazzling the opponent's driver. |
| 2. Disable high beam when following the car | When following the car in front, turn off the high beam to prevent reflected light from affecting the driver in front. |
| 3. Disable high beam in foggy days | Using high beams in foggy days will cause light scattering and reduce visibility. Fog or low beams should be used. |
| 4. Check the light regularly | Check the brightness and angle of the high beam regularly to ensure it is working properly. |
3. High beam related regulations
According to the Road Traffic Safety Law, the use of high beams has the following provisions:
| Contents of regulations | Penalty standards |
|---|---|
| 1. Use high beams illegally | A fine of 50-200 yuan will be deducted 1 point. |
| 2. Cause a traffic accident | They are subject to corresponding legal liability and may face higher fines. |
4. Discussions related to high beams on the Internet in the past 10 days
Recently, discussions about high beams have been very popular on social media and automotive forums, and here are some of the hot topics:
| topic | Popularity index |
|---|---|
| 1. Traffic accident caused by abuse of high beams | ★★★★★ |
| 2. How to properly adjust the high beam | ★★★★☆ |
| 3. Intelligent high beam system evaluation | ★★★☆☆ |
| 4. High beam and dash recorder conflict problem | ★★☆☆☆ |
5. Summary
Correct adjustment and use of high beams is a skill that every driver should master. Through the introduction of this article, you should understand the adjustment steps, precautions and relevant regulations of high beam lights. I hope you can use high beams reasonably when driving at night to ensure your own safety and avoid interference with others' driving.
If you still have questions about the adjustment of the high beam, it is recommended to consult a professional maintenance staff or participate in a driving training course to further improve driving skills and safety awareness.
en
